Respiratory care
ALTOFLOW HFNC with Bubble CPAP
Humidified high-flow oxygen therapy and bubble CPAP for neonatal, paediatric and adult patients, with an integrated turbine and air-oxygen blender.
1–60 L/min flow, neonatal to adult1–10 cmH₂O CPAP
Select a numbered point for details.
Respiratory care
MEDILUFT ICU Ventilator
Microprocessor-controlled ventilator for invasive and non-invasive ventilation of adult and paediatric patients, with twelve modes and high-flow oxygen therapy.
12ventilation modes
10–2000 mLtidal volume
2 hminimum battery backup
Specifications
As published by the manufacturer. Confirm against the registered labelling before tender submission.
| Patients and modes | |
|---|---|
| Patient type | Adult, paediatric |
| Modes | Volume control (CMV), assist control (volume and pressure), pressure control, PRVC, SIMV/V, SIMV/P, CPAP with pressure support, BIPAP, APRV, inverse ratio ventilation, non-invasive ventilation, high-flow oxygen therapy, paediatric mode |
| Apnoea backup | Backup mode for apnoea |
| Tidal volume setting | Patient weight-based |
| Leak compensation | Yes |
| High-flow oxygen therapy | Via nasal cannula, with FiO₂ control |
| Set-up | Predefined parameters for rapid patient set-up |
| Controls | |
| Tidal volume | 10–2000 mL |
| Volume support | 10–1600 mL |
| Respiratory rate | 5–90 breaths/min |
| I:E ratio | 1:1 to 5:1 |
| Inspiratory time | 0.2–10 s |
| Inspiratory pressure | Up to 80 cmH₂O |
| Pressure | 0–70 cmH₂O |
| Pressure support | 0–40 cmH₂O |
| PEEP / CPAP | Up to 30 cmH₂O |
| Inspiratory peak flow | 4–180 L/min |
| Minute volume | 1–30 L/min |
| Oxygen concentration | 21–100% |
| Inspiratory pause | 0–60% |
| Nebuliser | Integrated, with on/off |
| Other | Flow ramp for pressure, expiratory pause, sigh |
| Monitoring and display | |
| Monitored values | Tidal volume (Vte), minute volume, respiratory rate, I:E ratio, PIP, plateau pressure, mean airway pressure, PEEP, O₂ %, total run hours, battery level |
| Waveforms | Pressure/time, flow/time, volume/time |
| Loops | Pressure/volume, flow/volume, flow/pressure |
| Display | 10.1" colour touchscreen, LCD/TFT; two waveforms in real time; three graphs and two loops (not necessarily simultaneous) |
| Alarms | |
| Patient | Patient disconnected, low/high pressure, low/high minute volume, low tidal volume, high PEEP, high respiratory rate, low/high O₂, set volume reached (pressure control) |
| System | Low inlet air/O₂, sensor failure, system failure, pneumatic, low battery |
| Settings | Full alarm system for all ventilator settings and monitored values; single or dual tone |
| Power and gas | |
| Mains | 220/240 V AC, 50 Hz |
| Battery | Internal, minimum 2 hours |
| Other power | External DC |
| Gas delivery | Soundless compressor, external or integrated unit |
| Gas supply | 45–60 psi compressed air and oxygen |
| Mounting | Trolley for transport |
| Options | Neonatal, humidifiers, capnography |
Source: hildmedical.com, October 2026.
Consumables and accessories
None listed by the manufacturer.
Available from CraftEdge. The manufacturer’s instructions for use specify the parts for each device.
Unit configurations
Related equipment
Patient monitoring
Multi-Parameter Monitor
Bedside monitoring of ECG, SpO₂, NIBP, temperature and respiration, in 12-inch (EGL MP 121) and 15-inch (EGL MP 151) models.
12" / 15" screen, two models3- or 5-lead ECG
Patient monitoring
Central Monitoring System
Real-time data from several ventilators or bedside multi-parameter monitors on one screen, with alarms for abnormal values.
Ventilators, monitors connected devicesSeveral beds per screen